HydroMarine Titanium Chillers & Heat Pumps

Description:
The HydroMarine Air Cooled Chiller and Heat Pump line is the perfect fit for any aquatic temperature control application including Aquaculture, Hydroponics, Zoo’s and Aquariums, and more. These units utilize a Titanium Evaporator in a Schedule 80 PVC shell for high efficiency heat transfer in the toughest environments and have a flanged top for easy cleaning without removing the entire shell. All supports, jacket, and hardware are 316SS and the units come mounted on Corrosion Resistant FRP I-Beam or T-6061 Aluminum Square Tubing depending on the model.

• 

  1.5 TO 5 HP

  HydroMarine Heat Pumps

• 

  6 TO 10 HP

  HydroMarine Heat Pumps

HydroMarine Titanium Low-Temp Chillers

Description:
The HydroMarine LTC line is designed for applications requiring temperatures below 50°F all the way down to 33°F. Instead of using a standard HVAC unit, the LTC line utilizes a commercial grade refrigeration R-407 condenser that is designed to run in the temperature range stated earlier. These units are specifically designed for the low temperature aquatics market for applications such as Penguin Exhibits, cold-water fish and shellfish hatcheries, pack-out systems, and more.

• 

  2.5 TO 6 HP

  HydroMarine Low-Temp Chillers - Specification Sheet

HydroMarine Water-to-Water Titanium Heat Exchangers

Description:
The HydroMarine Water-to-Water heat exchanger is designed for facilities with hot-water or cold-water loops that need to add a new temperature control point. These units come mounted on 316SS Stands, with a Schedule 80 PVC Shell and titanium tube coil for all aquatic applications. An integral control mounted on the unit controls a 3-way valve, allowing water through the coil when there is a call for heating or cooling.

• 

  DH-WTW-6X2

  HydroMarine Water-to-Water Exchangers - Specification Sheet

• 

  DH-WTW-10X3

  HydroMarine Water-to-Water Exchangers - Specification Sheet

MiniMarine Heat Exchangers

Description:
The MiniMarine Titanium Heat Exchanger is designed for centralized hot-water or cold-water loops that need to add heat transfer area in tight spaces. A Dwyer controller is mounted on the control board on the top of the unit, along with the flow control valve which allows flow when the controller receives a call for heating. The titanium heat exchanger and SCH80 PVC shell are insulated and jacketed with Marine grade Aluminum.

• 

  MM-2.0

  MiniMarine Heat Exchangers - Specification Sheet

Aquatics PHE Package

Description:
The Aquatics PHE Package is a skid mounted turnkey temperature control system designed for facilities with hot-water or cold-water loops that need to add a new temperature control point. This unit comes in two sizes dependent on flow rate, and the plate heat exchangers are sized for each application to ensure proper heat transfer area. Using a modulating 3-way valve on the process flow, the Aquatics PHE Package provides accurate and reliable temperature control. Safety controls feature an aquatic side flow switch, and aquatic side hi-limit shutdown valve to protect piping and animals in system. This turnkey package saves time and money during installation, a priority on all projects.

Boiler Hex Skids

Description:
Our Boiler Skid Packages are designed for facilities with hot-water loops, especially with many drops to different heat exchangers servicing different loads. The boilers come with cascade capability to perform at peak efficiency under any varied load, which is 95% efficiency with our Condensing Boilers. These packaged boiler skids come with an Insulated and Jacketed Buffer Tank, Boiler Pumps, Expansion tank, fill train for incoming city water, and all hydronic elements needed such as air vents, unions, and isolation valves. WTW HEX is optional in this package, and we have many options (Shell and Tube, PHE, immersion coil) depending on your application.

Multi-Boiler Solution provides redundancy in case a boiler has to undergo maintenance. Additionally, cascading options allow to fine-tune sequencing of multiple boilers firing during a varying load condition by distributing load time equally between all boilers.

Large Boiler Package Pump Skid.

Main skid(s) with boilers will be pre-plumbed to this pumping skid. The multiple skids plumbed together are then unassembled for shipping in skids and sections of pipe. Skid also shows expansion tank, control panel for pumps, isolation valves, checkvalves, etc...

Small Boiler Package on one skid

including boiler pump, expansion tank, and Heat Exchanger. The rendering shows a Shell in Tube HEX, but PHE’s are also common (shown in the first rendering of this Boiler HEX Skids section). Larger systems can have each of these components on individual skids.

Chiller Hex Skids

Description:
Chiller Skid Packages are designed for facilities with cold-water loops, especially with many pools or tanks being chilled. Packaged Chiller Skids come with an Insulated and Jacketed Buffer Tank, Chiller Pumps, fill train for incoming city water, and all hydronic elements needed such as air vents, unions, and isolation valves. WTW HEX is optional in this package, and we have many options (Shell and Tube, PHE, immersion coil) depending on your application, and each HEX would come with a flow control train (which includes solenoid valve) and controller which will only activate the solenoid valve to allow flow if there is a call for cold water.

Large chiller skids are common in large hydroponic and aquaponic facilities that need to grow and keep vegetables in large quantities of chilled water, or large "cold fish" farms such as trout or salmon.

Under aquaculture applications we pair the chilling skids with our HydroMarine Evaporators because of their resiliance under dirty fish farm water.

Horizontal and Vertical Grid Coil Exchangers

Application:
Available for in tank heating and cooling applications to be used in conjunction with a boiler or chiller system for aqueous solutions. Can be used with steam/water pressures up to 100PSI.

Features:
Available in 20 Gauge Steel, T316 S/S and Titanium. Horizontal and vertical design. Standard 1.0" NPT connections, 1.0" diameter tubing, 2.0" headers.Special length and "L" shaped configurations available for bottom exchange applications.

Options:
Riser tube length extensions, exchanger hangers, sizes up 90 sq. ft. and 720,000 BTU sizes and water connections available.

• 

  Grid Coil Exchangers

  Specification Sheet

Helical Immersion Coils

Application:
For smaller applications requiring less heat transfer area, or applications with less space, Delta’s Helical Immersion coils are a great fit. Available in Titanium, these will withstand the toughest aquatic environments.

• 

  Helical Immersion Coils

  Specification Sheet

Plate Heat Exchangers (PHE)

Description:
Plate Heat Exchangers (PHE) are designed to provide maximum efficiency in heat transfer using non corrosive metals for various aquatic heating and cooling applications using the minimal amount of floor space. The exchangers are used in conjunction with chiller and boiler equipment. PHE units range from 4 to 300 gpm.

• 

  Plate Heat Exchangers (PHE)

  Specification Sheet

Single Point Aquaculture Package

Description:
The Delta Hydronics Singlepoint Aquatic Heating Package is a compact, energy efficient, and cost effective way to provide centralized heating to multiple points in an aquaculture system. This package can be used to heat any body of water such as raceways, nursery tanks, broodstock, etc.

The SAHP utilizes a 95% efficient Condensing Boiler, Insulated & Jacketed Buffer Tank, and Titanium/ Stainless Steel WTW Heat Exchangers to maintain each location at its desired temperature setpoint. Every point will have its own dedicated Electronic Temperature Controller, which would activate the pump to circulate heated water through the Heat Exchanger when the aquatic water temperature dropped below a desired setpoint.

Pumps can be preplumbed and mounted as shown or installed in the field. The fouling resistance from the heat exchanger cannot be overemphasized.

• 

  DH-SAHP

  Specification Sheet

Multipoint Aquaculture Package

Description:
The Delta Hydronics Multipoint Aquatic Heating Package is a compact, energy efficient, and cost effective way to provide centralized heating to multiple points in an aquaculture system. This package can be used to heat any body of water such as raceways, nursery tanks, broodstock, etc.

The MAHP utilizes a 95% efficient Condensing Boiler, Insulated & Jacketed Buffer Tank, and Titanium / Stainless Steel WTW Heat Exchangers to maintain each location at its desired temperature setpoint. Every point will have its own dedicated Electronic Temperature Controller, which would activate the pump to circulate heated water through the Heat Exchanger when the aquatic water temperature dropped below a desired setpoint.

Pumps can be preplumbed and mounted as shown or installed in the field. The fouling resistance from the heat exchangers cannot be overemphasized.

• 

  DH-MAHP

  Specification Sheet

Aquatics Boiler Package

Description:
The Delta Hydronics Aquarium Boiler Package is a compact, energy efficient, and cost effective way to provide temperature control to a single point application in Zoos, aquariums, pools, etc. The package utilizes a 95% efficient Condensing Boiler, Insulated & Jacketed Buffer Tank, and Compact Plate Heat Exchanger (Titanium or Stainless Steel) in a closed loop hydronic system to effectively bring your application to a desired temperature setpoint. All equipment comes pre-plumbed, mounted on FRP grating secured with 316 SS hardware.

• 

  AQUATICS BOILER PACKAGE

  Specification Sheet

Engineered Minipac

Description:
Delta Hydronics engineered MiniPac heat transfer solutions are exclusively configured for the Aquatic System Designer and LLS Engineer’s temperature control requirements and space challenges.

MiniPac is an engineered heat transfer system that can be customized for your heating or chilling application. The MiniPac heat transfer package utilizes a compact, gasketed Plate Heat Exchanger with a corrosion resistant T6061 Aluminum frame specifically designed for the aquatics industries.

• 

  MINIPAC

  Specification Sheet